disadvantages of planetary gearbox

Merchandise Description

Item Description

ZHangZhoug New CZPT Hydraulic Co., Ltd. is a expert company of planetary reducers/gearbox. At current,we designed tens of 1000’s specifications of the planetary reducer/gearbox, vacation generate,swing generate and winch travel.The ratio selection is 3.3~9000, and the output torque range is 500~1200000N.m. The set up, dimensions and performance parameters of the reducer are specifically the very same as renowned European makes, which can be perfectly changed and interchanged.

Information as follows:
BONFIGLIOLI (300 series, 700C collection, 700T collection, 600W series)
BREVINI (EM, ED, ET, EQ, EC, PD, PDA, CTD, CTU, SL varieties)
DINAMIC OIL (varieties RE, GB, RA, GBA)
REGGIANA RIDUTTORI (RR, RA kind)
COMER (PG, PGA, PGR, PGW kinds)
REXROTH (GFT, GFT-W, GFB kind)
ROSSI (R2E, R3E, R4E, RCE, RC2E, RC3E, MR2E, MR3E, MR4E, MRCE, MRC2E, MRC3E)
ZOLLERN (ZHP3.thirteen, ZHP3.fifteen, ZHP3.19, ZHP3.twenty, ZHP3.22, ZHP3.24, ZHP3.twenty five, ZHP3.26, ZHP3.27, ZHP3.29, ZHP3.31, ZHP3.32)
FAIRFIELD, AUBURN Gear, OMNI Gear, O&K, etc. Consequently,our planetary reducer/gearbox can be utilised to exchange the gearboxes of these makes.

Bonfiglioli Dinamic oil Brevini RR
three hundred RE110 EM1571 ED1571 ET2571 RR65/one zero five
301 RE210 EM1030 ED1030 ET2030 RR110/210
303 RE240 ED2030 ET3030 EQ4030 RR310
304 RE310 ED2040 ET3040 EQ4040 RR510
305 RE510 EM1045 ED2045 ET3045 RR510/710
306 RE810 EM1046 ED2046 ET3046 RR810
EM1065 ED2065 ET3065
307 RE1571 EM1090 ED2090 ET3090 RR1571
RE1520
309 RE1520 ED2150 ET3150 EQ4150 RR1700
310 RE2520 ED2250 ET3250 EQ4250 RR2700
ED2320 ET3320 EQ4320
311 RE3510 SL3001,SL3002,SL3003,SL3004 RR4000
313 RE3511,RE3512,RE3513,RE3514 SL4001,SL4002,SL4003,SL4004 RR5000/RR5200
315 RE6520 SL6001,SL6002,SL6003,SL6004   SL8501,SL8502,SL8503 RR6500
316 GB11000 SL12001,SL12002,SL12003,SL12004 RR8000
317 GB18000,GB21000, SL18001,SL18002,SL18003 RR10000
318 GB26000 SL25001,SL25002,SL25003,SL25004    RR15000
319 GB53000,GB53000 SL35001,SL35002,SL35003,SL35004    RR20000
320      
321 GB61000    

 

three hundred Collection Planetary Geabox Parameter

 

  Model    

    Rated Output Torque  

(N.m)

Max.Energy

(KW)

Max.Enter Speed

(rpm)

Ratio
   
301 1750 30 3000 three.4-2700 7-seven-hundred
303 2500 forty 3000 three.6-2800 9-800
305 5000 60 3000 3.6-2800 9-800
306 8500 75 2500 three.6-2900 9-800
307 12500 100 2500 3.4-2400 13-seven-hundred
309 18500 130

2500

three.4-2400 thirteen-seven hundred
310 25000 one hundred fifty 2000 4-2500 40-900
311 35000 one hundred eighty 2000 4-2100 18-800
313 50000 200 2000 four-2200 18-800
315 80000 250 1500 four-1800 70-900
316 105000 270 1500 4.4-1200 fifty-600
317 150000 300 1000 four-1900 70-900
318 200000 340 a thousand 4.4-1100 two hundred-seven-hundred
319 30000 380 five hundred four.8-1400 300-800

Place of work Environment

Our Gear
Accessories for 300 Collection

Certifications

 

 

FAQ

 

Q1:What is you MOQ?
A:MOQ is 1 piece.
Q2:What should I source to get a ideal design of hydraulic winch and quotation?
A: In order to suggest a most ideal product of hydraulic winch we should to know:
1.Total design no.
2.Output shaft form
three.Matching motor
4.Ratio
5.With or without brake

Make contact with Us

How to make contact with us?
 Nancy Zhang

Foreign Income&Advertising Supervisor
HangZhou Kemer Engineering Machinery Co.,LTD
 

US $10-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Layout: Coaxial
Hardness: Hardened Tooth Surface

###

Customization:

###

Bonfiglioli Dinamic oil Brevini RR
300 RE110 EM1010 ED1010 ET2010 RR65/105
301 RE210 EM1030 ED1030 ET2030 RR110/210
303 RE240 ED2030 ET3030 EQ4030 RR310
304 RE310 ED2040 ET3040 EQ4040 RR510
305 RE510 EM1045 ED2045 ET3045 RR510/710
306 RE810 EM1046 ED2046 ET3046 RR810
EM1065 ED2065 ET3065
307 RE1020 EM1090 ED2090 ET3090 RR1010
RE1520
309 RE1520 ED2150 ET3150 EQ4150 RR1700
310 RE2520 ED2250 ET3250 EQ4250 RR2700
ED2320 ET3320 EQ4320
311 RE3510 SL3001,SL3002,SL3003,SL3004 RR4000
313 RE3511,RE3512,RE3513,RE3514 SL4001,SL4002,SL4003,SL4004 RR5000/RR5200
315 RE6520 SL6001,SL6002,SL6003,SL6004   SL8501,SL8502,SL8503 RR6500
316 GB11000 SL12001,SL12002,SL12003,SL12004 RR8000
317 GB18000,GB21000, SL18001,SL18002,SL18003 RR10000
318 GB26000 SL25001,SL25002,SL25003,SL25004    RR15000
319 GB53000,GB53000 SL35001,SL35002,SL35003,SL35004    RR20000
320      
321 GB61000    

###

  Model    

    Rated Output Torque  

(N.m)

Max.Power

(KW)

Max.Input Speed

(rpm)

Ratio
   
301 1750 30 3000 3.4-2700 7-700
303 2500 40 3000 3.6-2800 9-800
305 5000 60 3000 3.6-2800 9-800
306 8500 75 2500 3.6-2900 9-800
307 12500 100 2500 3.4-2400 13-700
309 18500 130

2500

3.4-2400 13-700
310 25000 150 2000 4-2500 40-900
311 35000 180 2000 4-2100 18-800
313 50000 200 2000 4-2200 18-800
315 80000 250 1500 4-1800 70-900
316 105000 270 1500 4.4-1200 50-600
317 150000 300 1000 4-1900 70-900
318 200000 340 1000 4.4-1100 200-700
319 30000 380 500 4.8-1400 300-800
US $10-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Layout: Coaxial
Hardness: Hardened Tooth Surface

###

Customization:

###

Bonfiglioli Dinamic oil Brevini RR
300 RE110 EM1010 ED1010 ET2010 RR65/105
301 RE210 EM1030 ED1030 ET2030 RR110/210
303 RE240 ED2030 ET3030 EQ4030 RR310
304 RE310 ED2040 ET3040 EQ4040 RR510
305 RE510 EM1045 ED2045 ET3045 RR510/710
306 RE810 EM1046 ED2046 ET3046 RR810
EM1065 ED2065 ET3065
307 RE1020 EM1090 ED2090 ET3090 RR1010
RE1520
309 RE1520 ED2150 ET3150 EQ4150 RR1700
310 RE2520 ED2250 ET3250 EQ4250 RR2700
ED2320 ET3320 EQ4320
311 RE3510 SL3001,SL3002,SL3003,SL3004 RR4000
313 RE3511,RE3512,RE3513,RE3514 SL4001,SL4002,SL4003,SL4004 RR5000/RR5200
315 RE6520 SL6001,SL6002,SL6003,SL6004   SL8501,SL8502,SL8503 RR6500
316 GB11000 SL12001,SL12002,SL12003,SL12004 RR8000
317 GB18000,GB21000, SL18001,SL18002,SL18003 RR10000
318 GB26000 SL25001,SL25002,SL25003,SL25004    RR15000
319 GB53000,GB53000 SL35001,SL35002,SL35003,SL35004    RR20000
320      
321 GB61000    

###

  Model    

    Rated Output Torque  

(N.m)

Max.Power

(KW)

Max.Input Speed

(rpm)

Ratio
   
301 1750 30 3000 3.4-2700 7-700
303 2500 40 3000 3.6-2800 9-800
305 5000 60 3000 3.6-2800 9-800
306 8500 75 2500 3.6-2900 9-800
307 12500 100 2500 3.4-2400 13-700
309 18500 130

2500

3.4-2400 13-700
310 25000 150 2000 4-2500 40-900
311 35000 180 2000 4-2100 18-800
313 50000 200 2000 4-2200 18-800
315 80000 250 1500 4-1800 70-900
316 105000 270 1500 4.4-1200 50-600
317 150000 300 1000 4-1900 70-900
318 200000 340 1000 4.4-1100 200-700
319 30000 380 500 4.8-1400 300-800

Planetary Gearbox

This article will explore the design and applications of a planetary gearbox. The reduction ratio of a planetary gearbox is dependent on the number of teeth in the gears. The ratios of planetary gearboxes are usually lower than those of conventional mechanical transmissions, which are mainly used to drive engines and generators. They are often the best choice for heavy-duty applications. The following are some of the advantages of planetary gearboxes.
planetarygearbox

planetary gearboxes

Planetary gearboxes work on a similar principle to solar systems. They rotate around a center gear called the sun gear, and two or more outer gears, called planet gears, are connected by a carrier. These gears then drive an output shaft. The arrangement of planet gears is similar to that of the Milky Way’s ring of planets. This arrangement produces the best torque density and stiffness for a gearbox.
As a compact alternative to normal pinion-and-gear reducers, planetary gearing offers many advantages. These characteristics make planetary gearing ideal for a variety of applications, including compactness and low weight. The efficiency of planetary gearing is enhanced by the fact that ninety percent of the input energy is transferred to the output. The gearboxes also have low noise and high torque density. Additionally, their design offers better load distribution, which contributes to a longer service life.
Planetary gears require lubrication. Because they have a smaller footprint than conventional gears, they dissipate heat well. In fact, lubrication can even lower vibration and noise. It’s also important to keep the gears properly lubricated to prevent the wear and tear that comes with use. The lubrication in planetary gears also helps keep them operating properly and reduces wear and tear on the gears.
A planetary gearbox uses multiple planetary parts to achieve the reduction goal. Each gear has an output shaft and a sun gear located in the center. The ring gear is fixed to the machine, while the sun gear is attached to a clamping system. The outer gears are connected to the carrier, and each planetary gear is held together by rings. This arrangement allows the planetary gear to be symmetrical with respect to the input shaft.
The gear ratio of a planetary gearbox is defined by the sun gear’s number of teeth. As the sun gear gets smaller, the ratio of the gear will increase. The ratio range of planetary gears ranges from 3:1 to ten to one. Eventually, however, the sun gear becomes too small, and the torque will fall significantly. The higher the ratio, the less torque the gears can transmit. So, planetary gears are often referred to as “planetary” gears.
planetarygearbox

Their design

The basic design of a Planetary Gearbox is quite simple. It consists of three interconnecting links, each of which has its own torque. The ring gear is fixed to the frame 0 at O, and the other two are fixed to each other at A and B. The ring gear, meanwhile, is attached to the planet arm 3 at O. All three parts are connected by joints. A free-body diagram is shown in Figure 9.
During the development process, the design team will divide the power to each individual planet into its respective power paths. This distribution will be based on the meshing condition of all gears in the system. Then, the design team will proceed to determine the loads on individual gear meshes. Using this method, it is possible to determine the loads on individual gear meshes and the shape of ring gear housing.
Planetary Gearboxes are made of three gear types. The sun gear is the center, which is connected to the other two gears by an internal tooth ring gear. The planet pinions are arranged in a carrier assembly that sets their spacing. The carrier also incorporates an output shaft. The three components in a Planetary Gearbox mesh with each other, and they rotate together as one. Depending on the application, they may rotate at different speeds or at different times.
The planetary gearbox’s design is unique. In a planetary gearbox, the input gear rotates around the central gear, while the outer gears are arranged around the sun gear. In addition, the ring gear holds the structure together. A carrier connects the outer gears to the output shaft. Ultimately, this gear system transmits high torque. This type of gearbox is ideal for high-speed operations.
The basic design of a Planetary Gearbox consists of multiple contacts that must mesh with each other. A single planet has an integer number of teeth, while the ring has a non-integer number. The teeth of the planets must mesh with each other, as well as the sun. The tooth counts, as well as the planet spacing, play a role in the design. A planetary gearbox must have an integer number of teeth to function properly.

Applications

In addition to the above-mentioned applications, planetary gearing is also used in machine tools, plastic machinery, derrick and dock cranes, and material handling equipments. Further, its application is found in dredging equipment, road-making machinery, sugar crystallizers, and mill drives. While its versatility and efficiency makes it a desirable choice for many industries, its complicated structure and construction make it a complex component.
Among the many benefits of using a planetary gearbox, the ability to transmit greater torque into a controlled space makes it a popular choice for many industries. Moreover, adding additional planet gears increases the torque density. This makes planetary gears suitable for applications requiring high torque. They are also used in electric screwdrivers and turbine engines. However, they are not used in everything. Some of the more common applications are discussed below:
One of the most important features of planetary gearboxes is their compact footprint. They are able to transmit torque while at the same time reducing noise and vibration. In addition to this, they are able to achieve a high speed without sacrificing high-quality performance. The compact footprint of these gears also allows them to be used in high-speed applications. In some cases, a planetary gearbox has sliding sections. Some of these sections are lubricated with oil, while others may require a synthetic gel. Despite these unique features, planetary gears have become common in many industries.
Planetary gears are composed of three components. The sun gear is the input gear, whereas the planet gears are the output gears. They are connected by a carrier. The carrier connects the input shaft with the output shaft. A planetary gearbox can be designed for various requirements, and the type you use will depend on the needs of your application. Its design and performance must meet your application’s needs.
The ratios of planetary gears vary depending on the number of planets. The smaller the sun gear, the greater the ratio. When planetary stages are used alone, the ratio range is 3:1 to 10:1. Higher ratios can be obtained by connecting several planetary stages together in the same ring gear. This method is known as a multi-stage gearbox. However, it can only be used in large gearboxes.
planetarygearbox

Maintenance

The main component of a planetary gearbox is the planetary gear. It requires regular maintenance and cleaning to remain in top shape. Demand for a longer life span protects all other components of the gearbox. This article will discuss the maintenance and cleaning procedures for planetary gears. After reading this article, you should know how to maintain your planetary gearbox properly. Hopefully, you can enjoy a longer life with your gearbox.
Firstly, it is important to know how to properly lubricate a planetary gearbox. The lubricant is essential as gears that operate at high speeds are subject to high levels of heat and friction. The housing of the planetary gearbox should be constructed to allow the heat to dissipate. The recommended oil is synthetic, and it should be filled between 30 and 50 percent. The lubricant should be changed at least every six months or as needed.
While it may seem unnecessary to replace a planetary gearbox, regular servicing will help it last a long time. A regular inspection will identify a problem and the appropriate repairs are needed. Once the planetary gearbox is full, it will plug with gear oil. To avoid this problem, consider getting the unit repaired instead of replacing the gearbox. This can save you a lot of money over a new planetary gearbox.
Proper lubrication is essential for a long life of your planetary gearbox. Oil change frequency should be based on oil temperature and operating speed. Oil at higher temperatures should be changed more frequently because it loses its molecular structure and cannot form a protective film. After this, oil filter maintenance should be performed every few months. Lastly, the gearbox oil needs to be checked regularly and replaced when necessary.

 disadvantages of planetary gearbox disadvantages of planetary gearbox
editor by czh 2023-02-01

Recent Posts