Address: Economic and Technological Development Zone, Decheng District, Dezhou, Shandong
The single support has three pin holes on the planet carrier, put three pins, and then fix the gear on the pin. One side of the gear is the planet carrier, the other side is suspended, and a baffle is placed at the back to separate it. The double-supported planet carrier is emptied by CNC, and then...
The reason for the use of helical gears in the manufacture of planetary reducers: The main defect of spur gears is vibration. Especially the interlocking of the slow-drive motor and the main motor, the oil station oil pump motor and the main motor, and other interlocks required by the basic unit diagram. Check the connection of slow drives...
After all, there are many requirements for the purchase of a cycloid reducer, and it cannot be replaced in a short time like clothes and shoes.We need to find a cost-effective cycloid reducer, otherwise it will bring us some trouble.The following small series will introduce online purchase of cycloid reducer...
Hard tooth surface reducer mainly includes parallel shaft series and vertical shaft series.Parallel shaft reducers are produced according to national standards. Its classification includes four series of ZDY (single-stage), ZLY (two-stage), ZSY (three-stage) and ZFY (four-stage). The vertical shaft reducer is...
Worm gear reducer adopts worm gear friction transmission to complete the deceleration. Compared with gear transmission, the obvious disadvantages are low transmission power, more heat generation, and severe wear. Therefore, this type of reducer is not suitable for use in High power and long time connection...