The product features of the central drive mud scraper reducer: 1. Simple structure and light weight.Due to the truss structure, the weight is greatly reduced compared with the traditional mechanism. 2. The maintenance is simple and convenient, and the operating cost is low. 3. A new type of transmission mechanism, the reducer adopts a cycloid reducer, which is easy to install, simple and compact in structure, and high in efficiency. 4. The electrical components are all outdoor, safe and reliable, and can be controlled randomly or remotely. 5. It can be manufactured according to the user's specific size, and the parts in contact with water can also be made of stainless steel.
The central drive mud scraper reducer is characterized in that it includes a bracket, a sewage bucket, a working bridge, a transmission motor, a reducer, a central shaft and a scraper arm. The working bridge is arranged on the top of the sewage bucket, and the sewage bucket is arranged on the bracket. , The middle of the working bridge is provided with a central support, the transmission motor and the reducer are fixed on the central support, the central support is provided with a liquid inlet, the upper part of the side wall of the sewage bucket is provided with a liquid outlet, and the motor The output shaft is connected with the reducer, and the output shaft of the reducer is connected with the central shaft. The bottom plate of the sewage bucket is a conical bottom plate, the top angle of the conical bottom plate is set downward, and the top angle position of the conical bottom plate is set with a downward concave The mud collection cavity is a conical cavity, the lower end of the central axis extends to the bottom of the mud collection cavity, the side wall of the mud collection cavity is provided with a mud discharge port, and the bottom of the mud collection cavity is provided with For the sewage outlet, the scraper arm is connected to the middle and lower part of the central shaft and is arranged above the conical bottom plate. The lower part of the scraper arm is provided with multiple sets of scraper fixing units, and the scraper is fixed below the scraper fixing unit. The scraper is made of a flexible and firm composite rubber plate.
When the reducer of the central drive mud scraper is running, the transmission and adjustment mechanism work smoothly, without impact, vibration, and obvious collision or dragging sound.The scraper can operate intermittently and continuously without interruption.Its trouble-free operation is not less than 20000 hours.The service life of the whole machine and conventional parts is more than 20 years.The replacement of parts is simple and easy, and only conventional electromechanical tools are required, without any special tools.