The factors of the broken shaft of the cycloid reducer and the driving motor are analyzed, and how to deal with the broken shaft of the cycloid reducer is explained in detail.Some consumers have broken the output shaft driving the cycloid reducer after using the machine for a few months.Why did the cycloid reducer twist the output shaft of the drive motor?
Therefore, we checked the cross section of the output shaft of the drive motor and found that it is basically the same as the cross section of the output shaft of the cycloid reducer.The outer ring of the cross section is brighter, and the color of the cross section becomes darker toward the axis, and it is cracked at the end to the axis!
This completely shows that the important factor that causes the output shaft of the drive motor to break is that the motor and the cycloid reducer device are not at the same time!When the concentricity between the motor and the cycloid reducer is guaranteed to be particularly good, the output bearing of the motor is only subjected to rotational force, and it will work smoothly.
But when it is not concentric, the output shaft has to bear the radial force from the input end of the cycloid reducer. The long-term action of this radial force can force the motor output shaft to deform, and the viewpoint of deformation will continue to change as the output shaft rotates.Every time the output shaft rotates once, the direction of the lateral force changes 360 degrees.