Address: Economic and Technological Development Zone, Decheng District, Dezhou, Shandong
After the gear rotation of the reducer itself reduces the speed of the main equipment, do you know what you need to pay attention to when using it in the reducer?When the screwdriver is installed, there is no fluffing. You can install things that are prohibited on the output shaft of the reducer, such as hammer hair...
Cycloidal pinwheel reducer is a novel transmission device that uses the principle of planetary transmission and selects the meshing of cycloidal pin teeth.The entire transmission device of the cycloidal pinwheel reducer can be divided into three parts: the input part, the deceleration part, and the output part.There is a...
Precautions for adding lubricating oil to screw jacks.The screw jack is composed of worm gear, box, bearing, screw and other parts.The working principle is: the motor or manual drives the worm to rotate, the worm drives the worm to decelerate and rotate, and the inner cavity of the worm is processed into...
Precautions for worm gear screw elevators leaving the factory for 24 hours: Normally, the running-in phase of worm gear screw elevators after leaving the factory is about 24 hours. The need to pay attention to the running-in phase is to operate stably to avoid unnecessary misoperation.And when the worm gear screw rises and falls...
The component of the planetary gear transmission is generally proportional to the component of the gear, and the component of the gear is closely related to its data and heat treatment hardness.For example, under the same power, the component of the carburized and quenched gear will be about 1/3 of the component of the quenched and tempered gear. ...